How To Unlock iPhone Using GEVEY SUPREME iOS 4.0 – 5.0 with BB 1.59.00/2.10.04/3.10.01/4.10.01/4.11.04

This Works for iPhone 4 on iOS 4.0, 4.1, 4.2.1, 4.3, 4.3.1, 4.3.2, 4.3.3, 4.3.4, 4.3.5, 5.0 with BaseBands 01.59.00, 3.10.01, 4.10.01 and 4.11.04.

I bought it from


1. Turn off your phone, insert your SIMCARD and GEVEY SIM together with the metal SIM tray provided.

2. Turn your phone on and wait for the SIM welcome menu and then select ‘accept’.

3. Then wait 15 seconds, dial ’112′ then click ‘CALL’ and hang up within 2 seconds. (DO NOT LET THE CALL CONNECT).

4. Now go to SETTING, turn AIRPLANE MODE ON and wait until you see ‘No SIM Card Installed’. Then turn off AIRPLANE MODE; you phone should have signal after a few seconds.

5. Reboot

The only time I’ve had to redo steps 1-5 is when I remove the chip and use it with ANOTHER iPhone.

:) Thank you for watching and don’t forget to subscribe :)

Both comments and pings are currently closed.

13 Responses to “How To Unlock iPhone Using GEVEY SUPREME iOS 4.0 – 5.0 with BB 1.59.00/2.10.04/3.10.01/4.10.01/4.11.04”

  1. psnARMEDps3 says:

    Love the website and post. Can’t wait for more

  2. This can be a good article thanks for sharing this informative information.. I will go to your blog often for some newest post.

  3. John says:

    Thx for the video. U’ve done great job.
    But i faced with a problem. Maybe u can help?
    I have gevey supreme and iOS 4.1
    While 3G option is ON in settings i cant recieve incoming calls. Can sent and recieve messages, make calls, but fails with incoming.
    I experimented with two simcards – old one and new one. But the problem doesnt disappear (

    • Admin says:

      If you have a ATT iPhone 4 and you put it on another network, 3G will not work. Turn 3G off and turn Cellular data and data roaming on.

  4. James says:

    I can’t seem to get data working on T-mobile.

    I have turned on data roaming, enabled cellular data and entered the APN but I still do not have access to data.

    Can you outline the exact steps for enabling data? (i.e. do I need to restart my phone and etc)

  5. Ronnie says:

    Hi, I have an iPhone 4 on 4.3.5 and can’t get it to work on my gevey supreme (yellow) I restored the phone to factory settings and then it brings up the USB picture indication to connect to iTunes…. I then turned it off and followed ur steps and nothing.

  6. rambo says:

    Will the gevey supreme require 112 process ever again after first time ?
    Does it fail after a while or a couple of reboots ?

    IF yes, what kind of gevey never requires you to redo the process and never fails ?

    • Admin says:

      As long as it’s a legit Gevey Supreme, you only have to do the process once. Unless you remove the sim, then you have to repeat the process.

  7. Marc says:

    Hey man,
    Great video quick question tho.
    So i have the iphone 4 with 4.3.4 and 4.10.01 will the gevey sim supreme work on my iphone?
    Also i need to have 3g toggled on to use my service will the gevey sim work?

Thank you for watching and don’t forget to subscribe